Temperature range and control accuracy
The temperature range of the filament oven is usually between room temperature and 200 ° C, depending on the characteristics of the material to be treated. The temperature control accuracy is generally required to be within ±0.5 ° C to ensure the uniformity and stability of material treatment. In order to meet the needs of different processes, the oven can be segmented temperature control, and different temperatures can be set according to different stages.
Temperature distribution uniformity
The uniformity of temperature distribution is essential to ensure product quality. At least 6 detection points should be set inside the filament oven to ensure that the uniformity of temperature distribution is within ±2 ° C. This helps to avoid local overheating or under-heating problems, thereby improving production efficiency and product quality.
Heating method and heating time
The heating methods of filament oven mainly include hot air circulation heating and electric heat pipe heating. Hot air circulation heating can make the internal temperature of the oven more uniform, while the electric heat pipe heating can quickly increase the temperature. The heating time usually depends on the power of the oven and the temperature that needs to be reached, which generally takes about 20 minutes at 200 ° C. Electricity consumption is generally between 3-6KW, depending on the size and efficiency of the oven.
Power and circuit control
The power supply of the filament oven generally uses 3 Phi 380VAC±10% three-phase electricity to ensure a stable power supply. In terms of circuit control, it generally includes functions such as power supply, operation, setting temperature, arrival temperature, constant temperature timing, shutdown timing and alarm. Through the intelligent circuit control system, the precise control and automatic management of the oven can be realized.
Applicable space and capacity
The applicable space and capacity of the filament oven are determined according to the specific requirements. Domestic ovens generally have a capacity of 30-50L, while commercial ovens can reach hundreds of litres or more. The size of the applicable space will also affect the design and performance of the oven, such as the hall, aisle, living room and other different Spaces may require different specifications of the oven.
Safety and protection
The safety protection of the 3d printer filament oven is very important, especially in high temperature environments. The oven is generally made of stainless steel and has good heat resistance and corrosion resistance. In addition, the oven should also be equipped with explosion-proof furnace lights, timing functions, independent temperature control and other safety devices to prevent accidents.
Other functions
In addition to the basic heating function, modern filament ovens may also be equipped with some additional functions, such as low temperature fermentation, steam baking, etc. These functions can meet more diverse needs and improve the practicality and flexibility of the oven.
In short, the processing parameters of the filament oven need to be selected and adjusted according to the specific application scenarios and needs. By setting parameters such as temperature, time and heating mode reasonably, efficient and stable material handling can be achieved, and production efficiency and product quality can be improved. At the same time, pay attention to the configuration of safety protection and additional functions, which can further improve the performance and use experience of the oven.
